If you are looking for a durable and affordable smartphone, then the Blackview A100 might be the device for you. The Blackview A100 features a 6.67-inch HD+ display, 4GB of RAM, 64GB of internal storage, a 4680mAh battery, and a MediaTek Helio P70 processor. The device also has a 16MP rear camera and a 8MP front camera, which can capture decent photos and videos. However, like any other smartphone, the Blackview A100 is not immune to damages and malfunctions. One of the most common issues that users face is a broken or damaged display, which can be frustrating to deal with. But don’t worry, as in this article, we will provide you with a step-by-step guide on how to replace the Blackview A100 display, so that you can get your smartphone back to functioning as good as new.
Tools and Safety Measures Required to Replace Blackview A100 Display
Before we begin with the replacement procedures, it’s essential to have the right tools and take proper safety measures. Here is the list of tools that you will need to replace the Blackview A100 display:
- Screwdriver set (Phillips, Pentalobe, Tri-point, and Flathead)
- Plastic spudger
- Suction cup
- Adhesive tapes
- Prying tool
Here are some safety measures that you need to keep in mind while replacing the Blackview A100 display:
- Turn off the smartphone and remove the battery to avoid electrical shock.
- Remove any external accessories like SIM card, SD card, or phone case.
- Wear anti-static gloves and use an ESD (Electrostatic Discharge) wrist strap to avoid any static electricity buildup.
- Place the device on a flat surface and maintain proper lighting to keep the screws and other parts organized and prevent them from getting lost.
It’s crucial to use the right tools and take proper safety measures to ensure that the replacement process goes smoothly. You can purchase the right replacement display and tools from online marketplaces like Amazon or eBay. However, it’s important to ensure that you buy from a reputable seller to avoid getting fake or low-quality products.
How do I get my Blackview out of safe mode?
To get your Blackview out of safe mode, you can try restarting your phone by holding down the power button and selecting “restart.” If that doesn’t work, try holding down the power button and volume down button at the same time for a few seconds until the phone restarts. If these methods do not work, you might want to check out this YouTube tutorial on how to fix safe mode on Blackview phones: https://www.youtube.com/watch?v=xRRuY-cmw2E.
Step-by-Step Guide to Disassemble Blackview A100 Display
Now that we have the right tools and safety measures in place, we can proceed with the disassembly process to replace the Blackview A100 display. Here is a step-by-step guide to disassemble the Blackview A100 display:
- Turn off the smartphone and remove the back cover.
- Use a screwdriver set to unscrew the panels and remove them.
- Use a prying tool to carefully remove the damaged display from the motherboard.
- Release the adhesive tape from the display and disconnect the display cable carefully.
- Place the new display and apply the adhesive tape to secure it in place.
- Reconnect the display cable to the connector and reattach the panels and screw them back.
- Attach the back cover and other accessories.
- Turn on the smartphone and test whether the new display is working correctly.
It’s important to follow these steps carefully and be gentle while handling the components. Here are some additional tips to keep in mind while disassembling the Blackview A100 display:
- Avoid touching the LCD (Liquid Crystal Display) or flex cable with your fingers.
- Use the plastic spudgers or prying tools to separate the components gently.
- Ensure that you keep track of all the screws and do not misplace or lose them.
- If you face any difficulty while disassembling, seek professional help or refer to online forums or YouTube videos for guidance.
By following these steps and tips, you can successfully disassemble and replace the Blackview A100 display and make your smartphone look as good as new.
Why a Blackview phone?
If you’re looking for a phone that is both durable and affordable, Blackview is a great choice. Compared to other brands like Ulefone, Blackview usually offers a better combination of ruggedness and price. Check out their website for more information and to see their range of products.
Once you have successfully removed the damaged display, it’s now time to connect the new Blackview A100 display. Here are the steps you need to follow to replace Blackview A100 display:
Step 1: Carefully align the connector on the new display with the port on the motherboard.
Step 2: Insert the display cable into the connector port and ensure that it fits snugly in place.
Step 3: Secure the connector in place by pressing down on it gently.
Step 4: Apply adhesive tapes to secure the display in place and prevent any loose connections.
Step 5: Reattach the panels and screw them back into place.
It’s important to be careful while connecting the new display to prevent any damage or looseness. Here are some additional tips to keep in mind while connecting the new Blackview A100 display:
- Ensure that the display connector is facing the right way and fits snugly into the port on the motherboard.
- Do not apply too much pressure while securing the connector, as it can damage the display or the port.
- Use adhesive tapes to secure the display in place and avoid any loose connections.
- Test whether the display is working correctly once you have completed the disassembly process and connected the new display.
By following these guidelines and tips, you can replace the Blackview A100 display successfully and enjoy a fully functioning smartphone. You can purchase a new display replacement from Blackview Phone Website.
How to Test the New Blackview A100 Display
After successfully installing the new display, you need to test whether it is functioning correctly or not. Here are some steps to follow:
- Turn on your smartphone and check whether the display turns on and shows content.
- Check the brightness, contrast, and resolution of the display to ensure that they are set correctly.
- Open some apps and check whether the touch screen is responsive and accurate.
- Check the display for any dead pixels or uneven lighting.
- Watch some videos and images to see whether the display renders them accurately and without any glitches.
If the new Blackview A100 display is working correctly, it’s a good idea to take some additional precautions to avoid the need for another replacement. Here are some tips:
- Use a good quality screen protector to avoid scratches or cracks on the screen.
- Avoid exposing your smartphone to extreme temperatures, pressure, or impacts.
- Handle your smartphone carefully and avoid dropping it or applying too much pressure on the screen.
- Invest in a good quality case to protect your smartphone from minor accidents or falls.
If you face any issues while testing the new display, you may need to consult a professional technician or seek a replacement from the seller. It is best to address any issues as soon as possible to prevent any further damage.
How can I test my phone display?
To test your phone display, open the Phone app, tap the Keypad, and then type *#0*#. A diagnostic screen will pop up with buttons for a variety of tests. For testing pixel colors, tap Red, Green, or Blue.
Conclusion
Replacing the Blackview A100 display may seem daunting, but with the right tools, knowledge, and safety measures, it can be a relatively straightforward task. It is crucial to take additional precautions to avoid future damages. This guide has provided a step-by-step process to help you replace the Blackview A100 display. However, if you are not sure about the procedures or feel uncomfortable doing it yourself, it is best to seek professional help.
It’s important to remember that replacing the Blackview A100 display requires precision and patience. If you rush into it, you may end up causing more damage rather than fixing it. Therefore, it is best to take your time, follow the instructions carefully, and ensure all steps are executed properly.
In conclusion, if you need to replace your Blackview A100 display, make sure you have the necessary tools and follow these instructions. By doing it yourself, you could save money, but if you don’t feel confident, it’s better to bring your device to an experienced technician. Remember to be patient and take your time, and you will eventually end up with a functioning smartphone.
