Replacing a phone display can be a daunting task, but with the right tools and preparation, it’s definitely doable. If your Blackview BV7200 display is cracked or for some reason has ceased functioning, replacing it is the best solution. A damaged display can impede phone usage and potentially lead to further damages if not handled timely. Before starting the process, it’s important to ensure you have the necessary tools such as screwdrivers, nylon spudger, tweezers, suction cups, heat gun and pry tools. Once you have the tools in place, make sure to put on safety gear such as gloves, goggles, and an anti-static wristband to avoid any damage or injuries. In this article, we’ll guide you through the process of replacing the Blackview BV7200 display, making it easier for you to do it on your own. So, let’s get started!
Preparation
Once you have all the necessary tools on hand, it’s essential to prepare your Blackview BV7200 for the display replacement process. Here’s how to prepare your device:
- Make sure your phone is turned off before starting the process.
- Remove the back cover of the phone using a nylon spudger, taking care not to damage the edges.
- Use the appropriate screwdriver to unscrew all the screws, ensuring you keep them organized, so you know which screws go where when putting them back in.
- Remove the battery using the nylon spudger and make sure to disconnect it from the motherboard.
- Using a SIM card ejector tool, take out the SIM card tray and keep it aside.
- Clean the inner parts of the phone, especially the areas around the display and screws, to avoid any dust or debris from entering the device.
Following these steps properly will ensure a smooth and hassle-free process while replacing the display. It’s important to take your time and work carefully to avoid damaging any components of the phone. If you’re unsure about any steps or have any doubts, it’s recommended to consult online forums or seek help from professional phone repair services.
For additional resources, you can visit websites like iFixit and YouTube for detailed guides that show the process step by step. You can also purchase high-quality replacement displays from reliable sources like Amazon or the official Blackview website to ensure quality and longevity.
How do I start my Blackview phone?
To start your Blackview phone, hold down the power button located on the right side of the phone until the Blackview logo appears on the screen. For more details, you can visit the Blackview official website or watch an instructional video on YouTube like this one https://www.youtube.com/watch?v=E0y10_2LIaY.
Removing the Old Display
Now that you have prepared your Blackview BV7200 for the display replacement process, it’s time to remove the old display. Here are the steps you need to follow:
- Start by using a heat gun or hairdryer to heat up the edges of the phone’s screen. This will soften the adhesive that holds the display in place, making it easier to remove.
- Use a nylon spudger to pry the old display gently. Make sure to go slow and be gentle to avoid damaging the phone.
- Once you’ve pried open the display a little, insert a guitar pick or playing card into the gap to keep it from resealing.
- Use a heat gun or hairdryer intermittently on both sides of the display while prying to loosen the adhesive.
- Once you have released the adhesive on all four sides of the screen, slowly remove it from the phone.
- Disconnect the display connector from the motherboard using a spudger or tweezers, being careful not to damage any nearby components.
Keep in mind that the adhesive can be tough to remove and that you must be very careful that you don’t damage the phone’s frame or other components. If it’s tough to remove the adhesive on the edges, you can also use a small amount of isopropyl alcohol to help soften it.
Table: Comparison of Adhesive Removers
| Product Name | Main Ingredients | Price |
|---|---|---|
| Goo Gone Pro-Power | Proprietary Blend | $5.99 |
| WD-40 Specialist Fast Release Penetrant | Distilled Aliphatic Hydrocarbons and Isopropyl Alcohol | $7.15 |
| 3M General Purpose Adhesive Remover | High-Oxygenated Solvents | $12.99 |
Note that using adhesive removers comes with risks and should only be used when absolutely necessary. If you’re unsure which adhesive remover to use or how to apply it, it’s recommended to seek help from professional phone repair services.
How do you use adhesive remover?
Adhesive remover can be used by applying it to the affected area and allowing it to dissolve the adhesive. After a few minutes, use a scraper or cloth to remove the adhesive residue. Different types of adhesive removers are available in the market for different types of adhesives. It is important to follow the instructions on the product label carefully. This video tutorial on YouTube (https://www.youtube.com/watch?v=Z4hDBiZ-BBs) is a helpful resource for learning how to use adhesive remover effectively.
Installing the New Display
Now that you have successfully removed the old display from your Blackview BV7200, it’s time to install the new one. Here are the steps you need to follow:
- Gently connect the new display connector back into the motherboard. Make sure it’s securely in place but be careful not to apply too much pressure or damage the connector
- Carefully clean up any excess adhesive or residue from the phone’s frame using a microfiber cloth and adhesive remover if necessary.
- Peel off the protective film on the back of the new display carefully.
- Align the new display correctly by lining up its edges with the phone’s frame. Use spudgers to gently press the screen into the correct position.
- Once you have properly aligned the screen, use screws to secure it back in place.
- Test the phone by turning it on and making sure the display is functioning correctly.
Keep in mind that you need to ensure that the display is lined up correctly before screwing it back in place, as this is crucial for the overall functioning of the phone.
If you’re unsure about how to properly align the screen, it’s recommended to seek help from professional phone repair services. Additionally, be careful when handling the phone’s motherboard and the new display to avoid damaging any components.
One helpful resource for getting the necessary parts and tools for screen replacement is the Blackview BV7200 screen replacement kit, which can be ordered online. It comes with the necessary tools and parts needed for the screen replacement process.
How to set up a new monitor?
To set up a new monitor, first ensure that the cables are connected properly. Then, press the Windows logo key + P to select a display option. If you need more assistance, go to Start > Settings > System > Display. Your PC should automatically detect your monitors and display your desktop. Additional information or troubleshooting can be found on the manufacturer’s website.
Congratulations on successfully installing the new display on your Blackview BV7200. Here are the final steps for completing the process:
- Replace the battery by gently inserting it back into the phone’s compartment and securing it in place.
- Insert the sim card and screw the sim card slot back in place.
- Reboot your phone and test the new display to ensure proper functionality.
However, if you encounter any issues after completing the process, there are a few things you can try before seeking professional help. Here are some troubleshooting tips:
- Try resetting your phone by holding down the power and volume buttons.
- Ensure all connections are properly secured and screwing the display back in place.
- Double-check every step of the process to ensure there were no mistakes made.
If these tips don’t work, you may need to seek help from a professional phone repair service. It’s essential to prioritize safety while using your phone after replacing its display. Use a proper phone case for protection, and avoid exposing the phone to extreme temperatures or physical damage that may harm it.
One recommended resource for further reading is the Blackview BV7200 display replacement guide on iFixit. It’s a comprehensive guide with a step-by-step breakdown of the process, including pictures.
How do you put a SIM card back in a slot?
To put a SIM card back in a slot, first turn off your device, locate the SIM card slot (usually located on the side or back of the device), and carefully push the SIM card into the slot with the gold contacts facing down. If you are unsure how to do this, there are many instructional videos on YouTube such as: https://www.youtube.com/watch?v=NpFxT6zOE44.
Conclusion
Replacing the Blackview BV7200 display may seem like a daunting task, but anyone can do it with the right tools and knowledge. Ensure you have a suitable replacement display and take extra care during the process to avoid any damage to your phone.
Remember to follow all the safety guidelines and take your time to ensure each step of the process is done correctly. If you encounter any issues during the replacement process, double-check every step and refer to the troubleshooting tips we provided to fix any problems.
In conclusion, replace the display only if you are confident in your abilities. Else, take professional help. A Blackview BV7200 with a new display can dramatically enhance your viewing experience and bring back your phone’s original display quality.
Keep your phone protected with a phone case and avoid compromising its safety in any way. Following these steps, you can restore your Blackview BV7200 display quality and enjoy watching videos, browsing the internet, and scrolling through social media with enhanced clarity.
