DIY Guide: Replace OnePlus Nord N20 5G Display

DIY Guide: Replace OnePlus Nord N20 5G Display

If you’re experiencing issues with your OnePlus Nord N20 5G display, such as cracks or damage, you may be considering getting it repaired. However, this can be costly and time-consuming, especially if you’re outside of your warranty period. The good news is that you can replace the display yourself with the right tools and a little bit of know-how. In this article, we will guide you through the step-by-step process of replacing your OnePlus Nord N20 5G display. Before getting started, make sure you have the necessary tools and a new OnePlus Nord N20 5G display. You’ll also need to turn off your phone before starting the replacement process. By following this guide, you’ll not only save money but also gain the satisfaction of being able to fix your phone yourself.

Before starting the replacement process, make sure you have the necessary tools and a new OnePlus Nord N20 5G display. Here’s a list of things you’ll need to get started:

  • Screwdriver set
  • Prying tool
  • Suction cup
  • New OnePlus Nord N20 5G display

It’s important to use the correct tools to avoid damaging your phone during the replacement process. You can find the necessary tools online or at your local electronics store. Additionally, ensure that the new OnePlus Nord N20 5G display you’re purchasing is compatible with your phone. The specifications should match the original display. You can purchase a new display on websites like Amazon, eBay or other online retailers.

Step-by-Step Instructions:

Follow these steps to replace the OnePlus Nord N20 5G display:

  1. First, power off your OnePlus Nord N20 5G phone.
  2. Use a screwdriver to unscrew the screws located at the bottom of the phone. Keep the screws in a safe place as you’ll need them later.
  3. Use a prying tool to gently pry open the back cover. Be careful not to use too much force as it can damage the phone.
  4. Once the back cover is removed, use a suction cup to lift the battery out of the phone. You may need to use a prying tool to help loosen the battery if it’s stuck in place.
  5. Next, use the prying tool to remove the protective cover over the OnePlus Nord N20 5G display.
  6. Use a screwdriver to unscrew the screws that are holding the display in place. Keep the screws in a safe place as you’ll need them later.
  7. Use the prying tool to gently lift the old display out of the phone.
  8. Take the new OnePlus Nord N20 5G display and carefully place it in the phone, securing it with the screws you removed earlier.
  9. Reattach the protective cover over the new display.
  10. Place the battery back into the phone and reattach the back cover.
  11. Finally, use a screwdriver to reattach the screws at the bottom of the phone.
  12. Turn on your phone and check if the new display is working properly.

Replacing a OnePlus Nord N20 5G display may seem daunting, but with the right tools and careful attention, it can be done at home. However, if you’re unsure or uncomfortable with the process, it’s best to seek professional help or take your phone to a repair shop.

What to do before getting phone screen replaced?

Before getting your phone screen replaced, there are a few important things you should do to protect your device and data. Firstly, create a full back up of your phone data either on the cloud or a computer. Secondly, remove your SIM card, external storage and any security locks like a fingerprint or PIN. Also, note down your phone’s IMEI number as you may need it for warranty purposes. Lastly, perform a factory reset and remove your Google account while disabling factory reset protection. Once you have completed these steps, take your device to a reputable technician for screen replacement.


Before replacing the OnePlus Nord N20 5G display, you need to remove the back panel and battery cover. Here’s the step-by-step process:

  1. Use a suction cup to apply pressure on the back panel
  2. Use a prying tool to loosen the back cover
  3. Be careful not to damage any cables or the fingerprint sensor
  4. Now remove the screws on the battery cover
  5. Use the prying tool to gently pry off the battery cover
  6. Disconnect the battery connector

Here are some important things to keep in mind during this process:

  • Make sure to apply pressure only on the back panel, not on the display
  • Use the prying tool carefully to avoid damaging the cables or the fingerprint sensor
  • Ensure that the battery connector is disconnected before proceeding to the next step

By following these steps, you’ll be able to safely remove the back panel and battery cover without any damage.

Tools Required:

Suction cup – Provides grip and stability to remove the back panel

Prying tool – Helps to loosen the back cover without damaging any cables

Screwdriver set – Removes the screws on the battery cover

Note: With this guide, you can also learn to replace the OnePlus Nord N20 5G display.

How do you remove a battery cover?

To remove a battery cover, first, you need to locate the cover on your device. Then, look for any buttons or clips that hold it in place and press or slide them to release it. If there are no visible buttons, try looking up instructions on the manufacturer’s website or watching a video tutorial on platforms like YouTube. Here’s an example video tutorial that may help: https://www.youtube.com/watch?v=ePxajP38Nzc.


Once the back panel and battery cover are removed, the display assembly needs to be taken out. Here’s how to do it:

  1. Carefully disconnect any cables running over the display
  2. If necessary, use the prying tool to loosen cable connectors
  3. Remove the screws from the display assembly
  4. Use the prying tool to loosen the display assembly

Here are some important things to keep in mind during this process:

  • Be careful while removing the cables as they can be delicate
  • If the cable connectors are tight, avoid using too much force as it can damage the motherboard
  • Ensure that all screws are removed before loosening the display assembly with the prying tool

By following these steps, the display assembly can safely be removed without causing any damage to the phone.

Tools Required:

  • Prying tool – Loosens the cables and display assembly
  • Screwdriver set – Removes screws from the display assembly

We recommend using high-quality replacement parts such as OnePlus Nord N20 5G Display to ensure the longevity and reliability of your device.

What is a display assembly?

A display assembly refers to the combination of a display unit and a front panel digitizer unit. It is the complete unit that generates visual output for a device.


Installing the new display assembly:

After removing the old display assembly, the new one needs to be installed. Follow these steps:

  1. Place the new display assembly correctly in position
  2. Screw in the display assembly
  3. Connect the cable connectors and make sure they are properly secured
  4. Reconnect the battery connector
  5. Fit the battery cover and apply pressure to ensure it is properly secured

Here are some important things to keep in mind during this process:

  • Ensure that the new display assembly is compatible with your OnePlus Nord N20 5G
  • Use the appropriate size screwdriver for the screws so that they aren’t stripped
  • Connect the cable connectors properly as loose connections can cause display issues
  • Do not overtighten the screws as this can also cause damage to the motherboard and display assembly

By following these steps, the new display assembly can be installed correctly and securely without causing any damage to the phone.

Products:

Note: Ensure that it is compatible with your phone model.

What is an LCD assembly?

An LCD assembly refers to a set of items listed in a purchase order issued by the buyer to the seller. These items are manufactured based on the specifications offered by the buyer. Further information about LCD assemblies is available on various websites that offer electronic components or related products.

Conclusion:

Replacing the OnePlus Nord N20 5G display assembly might seem challenging, but with the right tools and steps, it can be done easily at home. You can save both time and money by doing it yourself instead of going to a repair shop. However, if you are not comfortable with DIY repairs, it’s always better to get professional help.

Additionally, it’s essential to remember some additional tips to maintain your new OnePlus Nord N20 5G display, including:

  • Don’t expose your phone to sunlight for prolonged periods
  • Use a protective screen guard to protect the display from scratches and accidental drops
  • Keep your phone away from water and moisture
  • Do not overload your phone with too many apps that can cause it to lag or heat up

Lastly, always purchase the new display assembly from genuine sellers to ensure the quality and compatibility of the product. Following these tips and guidelines can help you maintain your phone’s display, making it last longer and function efficiently.