The Motorola Edge 20 Pro is a high-end smartphone with impressive specifications. One of the most crucial components of any smartphone is the display. A broken or damaged display can make your device unusable or cause minor issues like display flickering and unresponsive touch. Thankfully, replacing the display assembly on the Motorola Edge 20 Pro is relatively easy and can be done at home with a few tools and skills. However, it’s essential to be patient and follow the instructions carefully to avoid causing further damage to your device. In this article, we will guide you through the process of replacing the Motorola Edge 20 Pro display to get your smartphone back to working order. We will cover each step in detail and provide safety tips to ensure you replace the display without damaging any other components. Whether you’re an experienced technician or a DIY enthusiast, you can replace the display assembly with ease by following these instructions.
Before you start the display replacement process, make sure you have the following tools and materials.
– Phillips screwdriver
– Plastic prying tool
– Suction cup
– Adhesive strips
– Heating pad or heat gun
– Replacement display assembly
Additionally, it’s crucial to follow these safety tips to avoid damaging your device or causing harm to yourself.
– Power off your Motorola Edge 20 Pro before starting the process.
– Remove the SIM card from your device as it may get damaged during the process.
– Wear antistatic gloves to prevent electrostatic discharge that can cause damage to the device.
– Make sure you have a clean, well-lit workspace to avoid losing any small components during the process.
Proper preparation is the key to a successful display replacement process. If you need to purchase any of the tools or materials, various websites offer them at reasonable prices. You can find replacement display assemblies on sites like Amazon, eBay, AliExpress, and other online stores. However, make sure to choose a reliable supplier that offers high-quality replacement parts to avoid any issues later.
How do you replace a screen replacement?
To replace a screen replacement, you can follow the instructions given in this helpful YouTube video (https://www.youtube.com/watch?v=UMDuYmHTabU). The video provides step-by-step guidance on how to replace a broken screen on various devices, including phones and laptops. Be sure to gather the necessary tools and replacement parts before starting the process. Additionally, some companies offer screen replacement services for those who prefer professional assistance.
Opening the Device
Follow these precise steps to open the Motorola Edge 20 Pro device in preparation for the screen replacement process.
- Heat the device with a heating pad or heat gun for one to two minutes to soften the adhesive strips.
- Insert the plastic prying tool between the frame and the screen. Start at the bottom of the smartphone and move the prying tool to the right and left sides, applying force until loosened. Other adhesive strips are present on the top side, the sides, and the back of the screen.
- Once the sides are loose, affix the suction cup tool at the bottom side of the device.
- Pull the suction cup tool to create a slight gap between the screen and the frame. Inserting a pry tool will help maintain a reasonable space between the device components and the device assembly.
- Once you remove the device edges, remove the screws underneath the screen protection bracket (be careful with the delicate screws.
- Carefully remove the screen protection bracket and keep it in a safe place to avoid exposing it to electrostatic discharge (ESD).
- Finally, remove the broken display assembly and get ready for the installation of the new one.
Moreover, while carrying out the opening process, use a heat gun and carefully heat the edges so the adhesive strips could be less stubborn. Note that the device could have up to 20 screws from the various components that you have to remove before opening it. However, not all screws have the same size. Thus, it’s crucial to keep track of which screw came from which hole.
Here’s a table showing the different types and sizes of screws found on the Motorola Edge 20 Pro:
| Screw Type | Size | Location |
|---|---|---|
| Phillips Head | #00 | Fingerprint scanner module, charging port module, earpiece module |
| Pentalobe | P2 | Bottom of the device (headphone jack port) |
| Tri-point Y0 | #000 | Camera module, SIM card tray, Taptic engine module |
| Phillips Head | #000 | Display assembly bracket (bottom side) |
How do you open a Motorola Moto phone?
To open a Motorola Moto phone, you’ll need to remove the back cover. Some Motorola phones have a small notch or gap along the edge of the phone where you can insert your fingernail or a small pry tool to gently lift off the cover. If your phone doesn’t have this notch, you may need to locate a small indentation or gap and use a tool to gently pry off the cover. A helpful video tutorial can be found on YouTube at https://www.youtube.com/watch?v=DfD29NHxY0M.
How To Replace Motorola Edge 20 Pro Display
Once you have successfully opened the device and removed the broken display, it’s time to replace it with a new one. Follow these steps for a smooth display assembly replacement process:
- Detach the flex cable connectors from the motherboard, battery and other attached components. Use a prying tool to free the connector from its socket, taking care not to scratch the board’s surface.
- Gently remove the broken display assembly and keep it in a safe place to avoid exposing it to electrostatic discharge (ESD).
- Carefully install the new display assembly and attach the flex cable connectors to the motherboard and other socketed components. Make sure the connectors are securely fastened.
- Double-check to ensure that the new display assembly is working by powering on the device. If the screen displays properly, you can reassemble the phone.
To ensure that the new display assembly is functioning correctly, try the following tests:
- Change the brightness to see the full range of the display’s color spectrum.
- Make sure that the touch screen is functional by tapping and swiping on the screen’s surface.
- Run a camera test to verify that the new display isn’t damaged or scratched, and that the camera can capture photos and videos correctly.
- Check whether the proximity sensor and the ambient light sensor are working properly.
Keep in mind that the installation of a new display assembly requires special attention, precision, and patience to avoid any damage to the device’s internal components.
For detailed instructions on how to replace a Motorola Edge 20 Pro display assembly, you can visit the Motorola support website or watch online tutorials on YouTube.
Can we repair broken display?
Yes, broken displays can be repaired through various options such as manufacturer or extended warranty service, mobile carrier repair service, or third-party phone repair shops. It is recommended to consider the warranty and service terms before deciding on repair options.
How To Replace Motorola Edge 20 Pro Display
After replacing the display assembly and verifying that the new display works correctly, it’s time to reassemble the phone. Follow these steps to ensure that reassembly goes smoothly:
- Reattach the back cover to the device by aligning the bottom first and snapping it into place. Don’t force it, or you may damage the cover or other internal components.
- Replace any screws that you removed earlier.
- Using a heat gun or similar tool, remove any air bubbles that may be present between the display and the frame. This is important to ensure a water-tight seal and that the display stays firmly in place.
- Insert the SIM card tray and ensure it is flush with the frame of the device.
- Power on the device and check if it works correctly.
If everything is working correctly, you have successfully replaced the display assembly on your Motorola Edge 20 Pro.
Keep in mind that during the reassembly process, you should make sure that you maintain cleanliness and follow safety guidelines to prevent any damage to the device’s components.
If you encounter any issues during the reassembly process, you can refer to online tutorials and guides or visit Motorola’s support website for assistance.
You can also choose to protect your phone by using a protective case to prevent it from damage due to any accidental drops or bumps. There are many options available in the market, including rugged and slim cases that offer different types of protection for different types of usage.
How long does it usually take to repair a phone screen?
If you have a minor crack on your phone screen, you can try placing a screen protector over it to keep it in place. Otherwise, it is better to take it to the service center for repair. According to recent information, fixing a minor screen crack should take about one to two hours.
Conclusion
Replacing the display assembly on a Motorola Edge 20 Pro may seem daunting, but with the right tools, preparation, and some patience, it can be a relatively straightforward process. Having a functional display screen is essential for a smartphone like the Motorola Edge 20 Pro, as it enables users to interact with the device’s features effectively.
If you don’t feel confident replacing the display assembly on your own, it’s better to seek professional assistance from a qualified technician or the manufacturer’s authorized service center. They can ensure that the process is carried out correctly and that your device is functioning correctly.
Overall, knowing how to replace a Motorola Edge 20 Pro display can save you time and money if you’re willing to undertake the process. It’s crucial to take safety precautions and maintain cleanliness to prevent damage to the device.
You can find various guides, tutorials, and videos online to help with the process. Always remember to test the new display assembly before reassembling the device and using it regularly. If you follow these steps, you can have a fully functional Motorola Edge 20 Pro display in no time.
