Replace Motorola Moto G30 Display: A DIY Guide

If you own a Motorola Moto G30 smartphone, it’s crucial to learn how to replace your device’s display. When you accidentally drop your Moto G30 or any other mobile device, the screen is usually the most common component that gets damaged. Although the screen of Motorola Moto G30 is sturdy enough to withstand scratches and cracks, it is not entirely immune to damage. Malfunctioning, broken, or shattered screens not only make your phone unpleasant to look at but also interfere with its functionality. They can also pose safety risks due to sharp edges and loose glass particles. Replacing a broken screen yourself can save you a significant amount of money that you would otherwise spend on skilled repair services. The good news is that Motorola Moto G30 screen replacement is not as challenging as it seems. In this guide, we will provide step-by-step instructions on how to replace the screen of your Moto G30. By following these instructions, you can restore your Moto G30 to working order, without needing to shell out for a professional repair service.

Gathering the necessary tools and materials for Motorola Moto G30 screen replacement

Before starting the screen replacement process, you must obtain some essential tools to ensure that the job is completed successfully. Here are the materials that you will require to replace the broken screen of your Motorola Moto G30.

• Replacement display assembly with frame: You must purchase a compatible Motorola Moto G30 LCD display assembly with frame.
• Plastic spudger: It’s a plastic tool used to prevent damage to the internal components of the phone during disassembly.
• Phillips 0 screwdriver: You will need a screwdriver to remove the screws that hold the phone together.
• Hairdryer or heat gun: You can use either of these to help soften the adhesive that’s holding the broken screen in place.
• Suction cup: A suction cup helps in detaching the screen from the frame once you’ve loosened the adhesive.
• Tweezers: They are required to connect the display cable to the motherboard, which can be a bit tricky.
• Adhesive tape: You’ll need a new adhesive tape to secure the new assembly onto the frame.

You can easily purchase all of these tools and materials as a kit for Motorola Moto G30 screen replacement from online stores like Amazon or eBay. Ensure that the replacement display and tools you buy are compatible with Motorola Moto G30 to avoid damage to your phone or components.

How To Replace Motorola Moto G30 Display
Removing the back cover of Motorola Moto G30
Removing the back cover is the first step in replacing the broken screen of your Motorola Moto G30. Here’s a step-by-step guide to remove the Moto G30 back cover.

1. Power off the device and remove the SIM tray.
2. Insert the plastic spudger tool between the back cover and the frame of the phone.
3. Apply mild pressure and move the spudger tool along the edges of the phone to loosen the back cover.
4. Once it is loose, use your hands to remove the back cover.

Note: Be careful while removing the back cover as it tends to be firmly attached to the device. Do not apply too much pressure as it can result in scratches or damage to the cover.

Removing the back cover allows access to the internal components of the phone, including the damaged display. After removing the back cover, you will move on to the next step of the screen replacement process by removing the battery and other components.

Now that you have successfully removed the back cover of your Motorola Moto G30, it’s time to remove the battery and other components of the phone. Follow the below steps to remove them:

1. Use a Phillips 0 screwdriver to remove the screws holding down the battery, SIM tray, and plastic covering that secures the motherboard.
2. Detach the battery from the motherboard by carefully pulling the battery connector away from the socket.
3. Now, remove the SIM card tray and set it aside.
4. Use the spudger tool to remove the plastic cover securing the motherboard.
5. Once you have removed all the components, set them aside in a safe place to avoid misplacing them.

Note: Make sure to remember the position of each screw and component as replacing them in the wrong position can cause hardware damage.

Removing the battery and other components is crucial to access the broken display and replace it with a new one. Make sure that you keep the components in a safe place to avoid any damage or misplacement during the replacement process. After this step, you can proceed to remove the old display of the phone.

To remove the old display, follow the below steps:

1. First, disconnect the charging port connector, audio jack connector and the fingerprint scanner connector from the motherboard using the spudger tool.
2. Now, use a heat gun or a hairdryer to heat up the edges of the phone for around 2-3 minutes to loosen the adhesive holding the display in place.
3. Insert a plastic opening tool under the edge of the display and carefully pry the display from the phone.
4. Once the display is removed, use a cleaning solution to clean the adhesive residue from the phone.
5. Install the new display assembly by following the above steps in reverse order.

Note: Before reassembling your phone, test the new display to ensure that it is working correctly.

Following these steps will help you to replace the display of your Motorola Moto G30. Make sure to be careful while handling the components and follow the instructions carefully to avoid any damage to the phone. If you need any further assistance, you can refer to the iFixit website for detailed instructions and repair guides.

How To Replace Motorola Moto G30 Display

After removing the battery and other components of your Motorola Moto G30, it’s time to remove the old display and replace it with a new one. Follow the below steps:

1. Warm up the adhesive holding the display in place by using a hairdryer or heat gun.
2. Use a plastic spudger to gradually loosen the adhesive along the edges of the old display.
3. Once the adhesive is loose, gently remove the old display from the Moto G30 phone.
4. Make sure to clean any remaining adhesive residue from the frame to ensure a secure fit for the new display.

Note: Be gentle while removing the old display to avoid any damage to the frame or the motherboard.

Removing the old display of your Moto G30 phone is crucial to install a new one, which is the next step of the replacement process. Make sure to clean the frame of the phone to get a secure fit for the new display. Once you have removed the old display, you can proceed to the final step of the replacement process which is installing the new display.

How To Replace Motorola Moto G30 Display

If you want to replace the display of your Motorola Moto G30 phone, follow these steps carefully:

1. Remove the back cover of your phone using a plastic pry tool.
2. Remove the screws that attach the battery connector, the display cable connector, and other components to the motherboard.
3. Disconnect the battery connector and the display cable connector from the motherboard.
4. Remove the old display assembly from the frame of the phone.

Note: Be gentle while removing the components to avoid any kind of damage to them.

Once you have removed the old display, it’s time to install the new one. Here are the steps to install the new display:

1. Attach the new display carefully with the frame and secure it in place using the adhesive that came with the display assembly.
2. Connect the display cable to the motherboard of the phone.
3. Then install the battery and other components that you had removed earlier.
4. Secure each component with screws using a screwdriver.

Note: Be careful while handling the display cable to avoid any damage to the phone.

Installing a new display on your Motorola Moto G30 phone can be challenging, but if you follow the above steps, you can do it quite easily. Make sure to attach the new display with the frame perfectly and don’t forget to connect the display cable to the motherboard of the phone. Once you have successfully installed the new display, you can power on your phone to check whether everything is working as expected. If all works well, you can put back the back cover and enjoy using your newly repaired Motorola Moto G30 device.

Conclusion

In conclusion, a broken display can be frustrating but don’t worry, you can successfully replace the display of your Motorola Moto G30 phone if you are careful and follow the steps we have listed in this article. Make sure to gather all the necessary tools before you start the process, and be cautious when removing the back cover and other components to avoid any unnecessary damage to the device. Also, remember to attach the new display carefully with the frame and to connect the display cable to the motherboard of the phone.

If you don’t feel confident about repairing your Moto G30 display yourself, you can seek professional help or take your phone to the nearest mobile repair shop. By doing so, you can ensure that your phone is in good hands and the job is done correctly.

Remember to always handle your phone carefully and use a protective case to avoid any damage in the future. With the information provided in this article, you can easily replace the display of your Motorola Moto G30 phone and enjoy using your phone with a new display.