Vivo X70 Pro+ is a flagship smartphone that features a stunning 6.78-inch Super AMOLED display with a resolution of 1440 x 3200 pixels. However, if you accidentally drop your phone or subject it to any other form of damage that results in a cracked or unresponsive display, you may need to replace it. Getting a professional to replace the display can be expensive, but you can do it yourself by following a few simple steps. In this article, we’ll show you how to replace the Vivo X70 Pro+ display and have your phone looking as good as new in no time. All you need is the right set of tools, some patience, and a little bit of technical know-how. Whether you are a DIY enthusiast or simply want to save money on repairs, our guide will help you replace the Vivo X70 Pro+ display in no time. So, put on your work gloves and let’s get started.
Tools and Components Required
Before starting the process of replacing the Vivo X70 Pro+ display, you need to gather all the required tools and components. Here is a list of things you will need:
- Replacement touch screen and LCD
- Small Phillips screwdriver
- Plastic spudger or opening tool to pry open the back cover
- Heat gun or hair dryer
- Adhesive tape (preferably double-sided)
- Clean cloth
- Pliers or tweezers
It’s important to purchase a high-quality replacement display to ensure that it’s compatible with your Vivo X70 Pro+. We recommend purchasing the replacement display from reliable sellers such as Amazon, eBay, or Best Buy. Additionally, it’s crucial to opt for a good-quality adhesive tape to ensure the display sticks firmly. When choosing the spudger or opening tool, go for one that has a soft tip to avoid damaging any components. Make sure you use a clean cloth to protect the phone’s body from scratches and dust while working on it.
Can the screen of the LCD be replaced?
The LCD screen cannot be fixed once it is damaged and needs to be replaced with a new one. This process is more technical than simply changing the glass. If you need to replace your LCD screen, it is best to consult with a professional.
How To Replace vivo X70 Pro+ Display
Once you have all the required tools and components, follow these steps to replace the vivo X70 Pro+ display:
1. Power off the vivo X70 Pro+ and disconnect it from the power source.
2. Use the spudger or opening tool to remove the back cover slowly. Start from the bottom and work your way around the phone.
3. Remove the battery by loosening the screws holding it in place with the Phillips screwdriver.
4. Heat the edges of the display for a few seconds using a heat gun or a hairdryer to loosen the adhesive holding the display in place.
5. Use a plastic spudger or a pry tool to remove the display carefully. Start from the edges and work your way around, ensuring you don’t damage any components.
6. Carefully place the new display in the same position and align it correctly.
7. Fasten the screws back in place using the Phillips screwdriver.
8. Apply adhesive tape around the edges of the new display to hold it in place firmly.
9. Connect the display’s connector to the board.
10. Put the battery back in and attach the back cover of the vivo X70 Pro+.
11. Power on the phone and check if the new display is working correctly.
Replacing the vivo X70 Pro+ display may take some time, but it’s worth it to have a functioning phone. If you face any difficulties during the process, it’s best to seek professional help. Also, it’s important to note that performing the repair yourself might void the vivo X70 Pro+ warranty.
How do I change my vivo screen?
To change the screen on your Vivo phone, you can follow the step-by-step instructions in this video tutorial: https://www.youtube.com/watch?v=ND17TvTamPE. The video provides clear guidance and helpful tips for replacing the screen yourself. Make sure to purchase a high-quality replacement screen from a reputable supplier to ensure the best results.
Tools and Components Required for Replacing Vivo X70 Pro+ Display
To replace the Vivo X70 Pro+ display, you will need the following tools and components:
- Screwdriver (Phillips head)
- Pry tool
- Opening tool
- Heat gun or hairdryer
- Replacement display
- Adhesive tape
It’s important to ensure that you have all the necessary tools before starting the repair process. Using the wrong tools might damage your phone or make the process more difficult. You can easily find all the required tools online or in a store that sells repairing equipment. Additionally, some websites or online stores sell repairing kits for the Vivo X70 Pro+ that include all the necessary tools and the replacement display, making the process more convenient.
The process of replacing the Vivo X70 Pro+ display involves the following steps:
- Power off the phone: Before starting the repair process, power off the phone and remove the SIM card tray if present.
- Remove back cover: Use a pry tool to carefully remove the back cover of the phone.
- Undo screws: Use a Phillips head screwdriver to undo the screws holding the rear housing in place.
- Detach battery: Disconnect the battery connector from the motherboard.
- Heat the display: Use a heat gun or hairdryer to warm up the edges of the display. This will loosen the adhesive that holds the display to the frame.
- Remove the display: Use an opening tool to carefully pry off the display from the frame. Be careful not to damage any of the phone’s components during this step.
- Install new display: Carefully install the new display in place of the old one, making sure to reconnect any relevant connectors.
- Reassemble the phone: Reconnect the battery, screw the rear housing back in place and fit the back cover.
- Power up the phone: Once the repair process is complete, power up the phone and test the new display to ensure that it’s functioning properly.
In conclusion, replacing the Vivo X70 Pro+ display is a delicate process that requires patience and the right tools. Make sure to follow the instructions carefully and take your time to avoid damaging any of the phone’s components. If you’re unsure about any step, consult a professional or an online resource for guidance.
Can you fix a LCD screen without replacing it?
It is not possible to fix a damaged LCD screen without replacing it. Replacing the LCD requires technical skills and expertise, and it cannot be done by just changing the glass. If you need to replace your LCD screen, you can find replacement screens and services online or through local electronic stores.
Steps to Replace Vivo X70 Pro+ Display
Follow the below steps to replace the Vivo X70 Pro+ display:
- Step 1: Power off the phone and turn it over. Remove the back cover and the battery using an opening tool or a pry tool.
- Step 2: Using a screwdriver, remove the screws that hold the metal bracket over the motherboard. Then remove the bracket and unplug the battery connector.
- Step 3: Use a pry tool to gently lift the display connector’s retaining flap, and then unplug the connector.
- Step 4: Use a heat gun or a hairdryer to heat the edges of the screen for a few minutes. This will loosen the adhesive holding the screen onto the frame.
- Step 5: Use a pry tool to gently lift the display’s top edge and then slowly separate the screen from the frame, working your way around the edges of the phone.
- Step 6: Remove any adhesive remnants from the frame and clean it with a clean, damp cloth. Allow it to dry completely before proceeding.
- Step 7: Take the new display and remove any protective films. Align it with the frame and press it down gently.
- Step 8: Reconnect the display connector and snap the retaining flap back into place.
- Step 9: Reattach the battery connector and the metal bracket. Tighten the screws with a screwdriver.
- Step 10: Replace the battery and the back cover, and power on the phone to test the new display.
Make sure to take your time, be patient, and double-check all the connections are secure after completing each step. Using a faulty or cheap-quality replacement screen might result in the display not working correctly, so make sure you purchase the replacement display from a reliable source. Some websites or online stores sell high-quality replacement displays for Vivo X70 Pro+, so you might want to check them out before making a purchase.
Can I replace vivo phone?
Yes, a customer can replace their Vivo phone if there is any functional error within 30 days from the date of purchase. They can also avail the one-year warranty if applicable. For more information, customers can visit the official Vivo website or contact customer support.
Tips for Replacing Vivo X70 Pro+ Display
Here are some additional tips to keep in mind while replacing the Vivo X70 Pro+ display:
- Before starting the replacement process, make sure to back up all your phone’s data to avoid losing any important information.
- If you’re not confident about replacing the display yourself, seek assistance from a professional technician.
- Be very careful while handling the phone’s internal components, as any damage could affect the phone’s overall performance or functionality.
- Make sure the phone is completely turned off and disconnected from any power source before starting the replacement process to avoid any potential electrical hazards.
- While removing the old display, use a plastic card or thin pry tool to prevent any damage to the phone’s frame.
- Make sure the replacement screen you purchase matches the Vivo X70 Pro+ model you have to avoid any compatibility issues.
- After replacing the display, let the adhesive dry completely before using the phone to ensure the new display is securely attached.
Following these tips can help ensure a successful Vivo X70 Pro+ display replacement. Additionally, you might want to consider purchasing a screen protector to protect your new display from scratches or damage. Some websites sell high-quality screen protectors that are compatible with Vivo X70 Pro+, so it’s worth checking them out.
How to replace computer display?
To replace the computer display, first, turn off the computer. Then, unplug all cables and accessories. Next, remove the old display by unscrewing it and gently pulling it from its hinges. After that, attach the new display and firmly screw it in place. Finally, plug in all cables and accessories and turn on the computer. For a visual guide, check out this helpful video tutorial: https://www.youtube.com/watch?v=uMNIHeP3vu4.
Conclusion
Replacing the Vivo X70 Pro+ display is a technical process that requires patience and precision, but it can be done successfully by following the steps outlined in this guide. Remember to gather all the necessary tools and components beforehand, be cautious when handling the phone’s internal components, and take your time throughout the process. By following the extra tips provided, you’ll increase your chances of successfully replacing the display without any complications.
If you’re uncomfortable performing the replacement yourself, seek professional assistance from a reputable technician. There are many websites available that specialize in phone repair services, or you can visit a local smartphone repair shop for help.
In summary, replacing the Vivo X70 Pro+ display is an achievable task with appropriate care and attention to detail. By following the steps and tips in this guide, you’ll be able to restore your phone’s visual performance, and ensure it’s back to functioning correctly.
