The Xiaomi POCO F4 GT is a budget-friendly smartphone that offers impressive features and specifications to its users. However, accidents can happen, and the display of your phone may get damaged or broken, which can cause several issues while operating the device. If you’re planning to replace the display of your Xiaomi POCO F4 GT, then it’s essential to have appropriate tools and knowledge about the repair process. The good news is that replacing the display is not as complicated as it may sound, but it needs patience, carefulness, and concentration to get the job done right. In this article, we will guide you through the process of replacing the display of your Xiaomi POCO F4 GT and provide you with valuable insights to avoid common mistakes that people make during the repair process. By the end of this article, you’ll be ready to bring your phone back to its original state with a new display installed. So, without further ado, let’s get started.
Gather Tools and Equipment
The first and foremost step in replacing your Xiaomi POCO F4 GT display is to gather all the necessary tools and equipment. Before starting the repair process, you need to ensure that you have the right set of tools, including:
- Screwdrivers of different sizes.
- A pry tool to open the phone properly.
- A heat gun or a hairdryer to soften the adhesive and separate the display.
- A suction cup to lift the screen and separate it from the phone.
- A new compatible display that you can buy from various online websites, including Amazon, eBay, etc.
You need to make sure that the replacement display is compatible with your Xiaomi POCO F4 GT model to avoid any further damage to your phone. You can find a range of affordable replacement displays online that are compatible with the Xiaomi POCO F4 GT. Once you have all the necessary tools and equipment, you can smoothly go ahead with the replacement process.
How do I get rid of ads on my Poco X4 Pro?
To get rid of ads on your Poco X4 Pro, you can follow these steps:
1. Go to Settings.
2. Click on Additional Settings.
3. Click on Authorization & Revocation.
4. Turn off “msa” and confirm.
5. From there, you can also disable “Personalized ad recommendations” and “Receive recommendations”.
You can also watch this video on YouTube for further guidance: https://www.youtube.com/watch?v=-BkkN0Yo2FQ.
Before starting the process of removing the display, it’s essential to remove the battery. Here’s how you can do it:
- Turn off the phone and remove the back cover carefully.
- Use a pry tool to loosen and disconnect the battery connector from the motherboard.
It’s important to disconnect the battery to avoid any electrical short circuit and keep your phone safe during the repair process. The battery of Xiaomi POCO F4 GT is a Li-Po 5065 mAh battery with a fast-charging of 67W, which can charge up to 50% in just 15 minutes. Once the battery is disconnected, you can move on to the next step of removing the display.
To replace the Xiaomi POCO F4 GT display, you need to follow these steps:
- Remove the back cover.
- Disconnect the flex cable of the old display assembly.
- Remove the speaker assembly.
- Remove the necessary screws that attach the display assembly to the frame.
- Use a pry tool to release the clips that hold the display assembly to the frame.
- Detach the display assembly from the frame.
Before installing a new Xiaomi POCO F4 GT display, you need to make sure you have the required tools and replacement part. The replacement part can be purchased online from websites such as Amazon or eBay. Some of the tools required to replace the display are screwdrivers, pry tools, and tweezers.
Installing the new display assembly is a reversal of the steps taken to remove the old display assembly. Make sure to connect the flex cable of the new display assembly and follow all the steps carefully. Once the new display is installed, test it to confirm if it is working perfectly.
Replacing a Xiaomi POCO F4 GT display can be a challenging process, but with the right tools and techniques, one can get it done efficiently.
What order do you remove battery in?
When disconnecting the cables from the old battery, disconnect the negative cable first, then the positive cable. To reconnect the new battery, connect the positive cable first, then the negative. This is to prevent any electrical short circuit or damage to the vehicle’s electrical system. Remembering this order is crucial while replacing the battery.
Now that you’ve removed the battery, you can proceed with removing the display assembly. Here are the steps to follow:
1. Use a heat gun or hairdryer to heat the edges of the phone for a few minutes. This will soften the adhesive.
2. Place the suction cup on the screen and press it firmly so that it sticks to the surface. Pull up on the suction cup to create a gap between the display and frame.
3. Insert the pry tool gently into the gap and slide it around the edge of the phone to loosen the adhesive. Do this carefully and avoid slipping the tool, or you may damage the frame.
4. Gradually lift the display assembly and detach the connectors until you remove the display fully.
It’s crucial to be gentle while removing the display assembly to avoid causing damage to the display or frame. Once done, you can proceed with replacing the display assembly. You can find replacement displays at authorized service centers or on e-commerce platforms like Amazon, AliExpress, or Flipkart. Make sure to purchase a display that is compatible with Xiaomi POCO F4 GT.
Replace the Display
After removing the damaged display, it’s time to replace it with a new one. Here is how you can replace it:
- Place the new display onto the phone, aligning it with the edges and properly fitting it over the frame.
- Attach the connectors on the display to the motherboard. Ensure that they fit in properly before proceeding.
- Gently press down on the display to stick it to the adhesive. Apply even pressure across the entire surface to ensure that the display sticks firmly to the frame.
- After sticking the display, reattach the battery connector to the motherboard and put the back cover back on.
Guide to Replace the Display
| Steps | Images |
|---|---|
| Place the new display onto the phone, aligning it with the edges and properly fitting it over the frame. |  |
| Attach the connectors on the display to the motherboard. Ensure that they fit in properly before proceeding. |  |
| Gently press down on the display to stick it to the adhesive. Apply even pressure across the entire surface to ensure that the display sticks firmly to the frame. |  |
| After sticking the display, reattach the battery connector to the motherboard and put the back cover back on. |  |
It’s important to note that the replacement display must be compatible with Xiaomi POCO F4 GT. You can find compatible displays at authorized service centers, or on e-commerce websites like Amazon, AliExpress, or Flipkart. Make sure to check the specifications of the display before purchasing it. After you’ve successfully replaced the display, turn on the phone to ensure that everything is working properly.
How to replace computer display?
To replace a computer display, first, you will need to ensure that you have the correct replacement part for your particular brand and model of computer. Once you have the replacement display, you can follow step-by-step instructions provided by the manufacturer or search for online tutorials for your specific computer model. A helpful video tutorial on how to replace a laptop display can be found on YouTube at this link https://www.youtube.com/watch?v=uMNIHeP3vu4.
Test the Phone
After replacing the display, it’s important to test the phone and ensure that everything is working correctly. Here are some steps to follow:
- Turn on the phone and check the touch response on the new display.
- Open a few apps and check if they run smoothly.
- Check the overall display quality and ensure that there are no dead pixels or distortion.
- Check other functions on the phone, including the speaker, microphone, and camera. Ensure that they are working correctly.
If you notice any issues during the testing process, then you may need to retrace your steps and ensure that the replacement was done correctly. In case the problem persists, it’s advisable to seek help from a professional technician.
Common Issues and Solutions
| Issues | Solutions |
|---|---|
| Touch screen not responding properly | Ensure the connectors are correctly attached and check if the display is damaged |
| Black spot or dead pixel on the display | Replace the display with a new one that’s compatible with Xiaomi POCO F4 GT |
| Display flickering or distorted | Check the connectors and adhesive, and ensure that the display is correctly aligned with the edges of the frame |
Finally, it’s important to use a good quality screen protector and a sturdy phone case to avoid any future damage to the display. You can find screen protectors and phone cases for Xiaomi POCO F4 GT on e-commerce websites like Amazon, Flipkart, or AliExpress. Make sure to purchase them from trusted sellers who offer genuine products.
Additional Keywords: touch response, dead pixels, distortion, speaker, microphone, camera, professional technician, screen protector, phone case, trusted sellers.
How do I test my touch screen?
To test your touch screen, first, clean it with a soft cloth to remove any debris or fingerprints. Then, open a basic note-taking app and try writing on the screen with a stylus or your finger. Pay attention to whether the touch response is accurate and consistent. If you notice any issues, such as unresponsive areas or inaccurate touch input, you may need to recalibrate your touch screen or contact the manufacturer for support. Some websites offer touch screen testing tools, such as Touchscreen-Test.net, that can help diagnose any issues.
Conclusion
Replacing the Xiaomi POCO F4 GT display can be a little intimidating if you’ve never done it before, but with the right tools, knowledge, and proper instructions, it can be done easily and within a reasonable amount of time. This guide has provided you with a step-by-step process on how to replace the display of your Xiaomi POCO F4 GT.
Remember to take your time, work carefully, and ensure that you have all the necessary equipment before you start. One thing to keep in mind is that if you don’t feel comfortable performing this replacement yourself, it’s better to seek professional help from a technician to avoid any further damage to your device.
We hope this guide has been helpful to you and that you are now able to replace your Xiaomi POCO F4 GT display with ease. Always make sure to handle your device with care and take necessary precautions to avoid future damage to the display. Good luck!
