How to Replace ZTE Blade 11 Prime Display: DIY Screen Replacement Guide

How to Replace ZTE Blade 11 Prime Display: DIY Screen Replacement Guide

The ZTE Blade 11 Prime is a popular Android smartphone that boasts a large display, long battery life, and impressive camera features. However, accidents can happen, and your phone’s display can become damaged due to a drop or impact. If you’re in this situation, you may be wondering how to replace the ZTE Blade 11 Prime display. Fortunately, replacing the display on this device is relatively simple if you have the right tools and instructions. In this article, we’ll guide you through the steps needed to replace the ZTE Blade 11 Prime display. We’ll cover everything from the tools required, to the preparation needed, to the actual display replacement process, and the testing phase. By the end of this guide, you’ll have the confidence and knowledge to replace your ZTE Blade 11 Prime display and have a functioning smartphone once again.

Tools Required

Before you start replacing the ZTE Blade 11 Prime display, you’ll need to gather a few tools. Here are the tools you’ll need:

  • Screwdriver (Phillips-head and flat-head)
  • Plastic pry tool
  • Heat gun or hair dryer
  • Adhesive strips or double-sided tape
  • Replacement display

It’s important to make sure that you have all the necessary tools before starting the replacement process. In addition, you may want to wear some safety gloves, especially if you are using a heat gun. If you don’t have any of these tools, you can purchase a smartphone repair kit online, which will include everything you need. Some websites that offer these kits include Amazon, iFixit, and Parts4Cells. Additionally, if you have any questions or difficulties during the process, you can refer to online forums or video tutorials for help. Some popular forums for smartphone repairs include XDA Developers and the Android Central forums.

How do you take the back off a ZTE Blade?

To take the back off a ZTE Blade, first, power off the phone and remove any case or cover. Then, locate the small slot at the bottom of the phone’s back cover and use a fingernail or a pry tool to lift it off. For more detailed instructions, you can watch this video tutorial on YouTube:


Before replacing the ZTE Blade 11 Prime display, there are a few preparations you need to make. Here are the steps you need to follow:

  • Power off your phone and remove the SIM card tray.
  • Remove the back cover of the phone, if it has a removable one.
  • Start heating up the adhesive around the edges of the screen using a heat gun or hairdryer. Be careful not to overheat the device to avoid causing any internal damage.
  • Once the adhesive is heated, use a plastic pry tool to gently lift the screen from the edges. Be careful not to apply too much force to avoid breaking the screen further.
  • Make sure to keep track of any screws, ribbons, or components as you slowly detach the screen from the phone.

Interesting fact: The ZTE Blade 11 Prime screen is made of stronger and more durable glass than some of its predecessors, but it’s still vulnerable to cracking or breaking if dropped or mishandled. By following the above steps, you can safely and easily replace the damaged screen yourself.

It’s important to note that each phone model and manufacturer may have slightly different preparation steps. Therefore, it’s crucial to carefully read through the manufacturer’s instructions before starting the process. Additionally, you can find step-by-step tutorials or video guides on websites such as iFixit or YouTube to help you through each stage.

Table of Manufacturer Guides

Manufacturer Website

Some manufacturers may offer specific guides or instructions for replacing different components, including screens. By visiting their official website or contacting their support team, you may find helpful information that can make the replacement process easier.

Does the ZTE Blade have a removable battery?

Yes, the ZTE Blade has a removable battery. To remove it, gently lift and remove the battery cover from the bottom edge corner. Then, lift and remove the battery from the notch in the lower edge of the battery compartment, ensuring the connectors on the battery align with the connectors on the device. For more information, check the user manual or ZTE’s website.

Removing the old display

Once you’ve properly prepared your phone for a ZTE Blade 11 Prime display replacement, you can begin removing the broken or damaged screen. Here are the steps you need to follow:

  • Use a plastic pry tool to gently loosen the screen from the edges. There should be adhesive holding the screen in place.
  • Slowly lift the screen from the phone, using a pry tool to gently detach any ribbons or connectors as you go.
  • Be careful of any small components, such as the home button or front-facing camera, that may come loose when you remove the screen.
  • Remove any adhesive residue from the phone frame, either using your hands, a cloth or a solvent such as rubbing alcohol.

It’s important to mention that you may encounter different challenges during the removal process, such as stuck screws, stubborn adhesive, or difficult-to-detach ribbons. In such cases, it’s recommended to use specialized phone repair tools or to consult a professional repair service.

Related Products

If you’re looking for specialized tools or kits for your ZTE Blade 11 Prime screen replacement, there are several products available online or in local stores. Here are some recommendations:

  • Replacement screen: You can find ZTE Blade 11 Prime screens for purchase on Amazon, eBay, or other online marketplaces. Make sure to choose a reputable seller and double-check the compatibility of the screen with your phone model.
  • Repair kit: Many phone repair kits may include all the necessary tools and components for ZTE Blade 11 Prime display replacement, including adhesive strips, pry tools, and screws. Examples include the iFixit Repair Business Toolkit or the YONTEX DIY Mobile Phone Repair Tool Kit.
  • Adhesive guide: If you want to make sure your new screen is perfectly aligned, you can use adhesive guides, such as the YEECHUN Adhesive Sticker Tape LCD Display Digitizer Touch Screen, that provide a template for the exact placement of the screen adhesive and reduce the risk of misalignment.

Before purchasing any replacement parts or repair kits, make sure to read reviews, compare prices and check the reputation of the seller or manufacturer. Also, be mindful of any warranties or returns policies offered by the vendor, in case the product doesn’t fit or function properly.

What to do if your screen is damaged?

If your screen is damaged, there are several options to consider for getting it fixed. One option is to use a manufacturer or extended warranty to replace the screen. Another option is to ask your phone carrier to repair it. You can also take it to the nearest phone repair shop for repairs. You may also want to check out some websites or products that offer DIY screen replacement kits.

Installing the new display

After successfully removing the old display, you can proceed with the installation of the new one. Here are the steps to follow for a ZTE Blade 11 Prime screen replacement:

  • Insert any necessary components, such as the front-facing camera or speaker mesh, into the replacement screen.
  • Align the new screen with the phone frame, making sure all the ports and buttons are properly aligned and there’s no gap between the screen and the phone body.
  • Attach any ribbon connectors to their respective ports, ensuring they click into place.
  • If necessary, apply adhesive strips to the edges of the new display, using a guide template for proper alignment.
  • Press the new display firmly into place, making sure it’s secure and not loose.

It’s important to note that during this process, you should avoid touching the surface of the screen or the adhesive to prevent fingerprints or smudges. Also, make sure not to overtighten any screws or exert too much pressure on the screen, as this may cause damage.

Related Websites

If you need additional guidance or troubleshooting tips during your ZTE Blade 11 Prime display replacement, there are several websites that provide step-by-step instructions or video tutorials. Here are some useful resources:

Website Pros Cons
iFixit – Comprehensive guide with pictures
– Offers high-quality repair tools and replacement parts
– Some steps may be challenging for beginners
Smart Easy DIY – Video tutorial with clear instructions
– Includes tips and warnings
– Requires some prior technical knowledge
– Lacks detailed written instructions
TechJuice – Step-by-step written guide with images
– Easy to follow even for beginners
– Not specifically tailored for ZTE Blade 11 Prime model
– Lacks information on troubleshooting and tools

Before using any online resources, make sure to read reviews or feedback from other users and double-check the accuracy and safety of the information provided.

How do I align my phone screen?

To align your phone screen, first, go to your phone’s Settings, then choose the Display option. From there, select the Orientation or Rotation option and make sure it is turned on. Once it is on, turn your phone sideways until the screen rotates to the desired position. If your phone’s orientation sensor is not working properly, you can also try calibrating it. Check your device’s user manual for instructions on how to calibrate the sensor. If you are still having issues with screen alignment, you may want to contact your phone manufacturer or visit their support website for further assistance.

Testing and finishing up the replacement

Once you’ve installed the new screen and reassembled the device, you’ll need to test the display to ensure it’s functioning properly. Here’s what you should do:

  • Reconnect the phone’s battery and turn it on.
  • Check if the screen turns on immediately, and if the colors and brightness are accurate and consistent.
  • Test the touch sensitivity by swiping, tapping, and typing on the screen multiple times.
  • Check if the proximity sensor, front-facing camera, and ambient light sensor are working correctly by using them during phone calls and in different lighting conditions.
  • Look for any dead pixels, unusual lines, or distorted images, which may indicate a defective screen.

If you encounter any issues during the testing phase, don’t panic. You can try to troubleshoot or retrace your steps by following online forums, manufacturer’s support pages, or customer service.

Related Products

If you need to purchase tools or replacement parts for your ZTE Blade 11 Prime screen replacement, there are several online stores and marketplaces that offer high-quality products at affordable prices. Here are some recommended options:

Product | Pros | Cons | Where to buy
Screen replacement kit | – Includes all the necessary tools and adhesive
– Easy to use for beginners
– Comes with a warranty | – May not be brand-specific or tailored for ZTE Blade 11 Prime model
– Shipping may take long | Amazon, eBay, Best Buy
Replacement screen | – High-quality OEM or third-party products
– May include features such as oleophobic coating, water or scratch resistance
– May be cheaper than buying from a repair shop | – Requires technical knowledge to install
– May have compatibility issues | Amazon, AliExpress, Newegg
Smartphone Repair Tool Kit | – Includes various screwdrivers, pry tools, spudgers, and tweezers
– Compatible with multiple phone models
– Durable and long-lasting | – May not include specific tools for ZTE Blade 11 Prime model
– May be expensive for a one-time use | iFixit, Walmart, Home Depot

Before buying anything, make sure to do your research, compare prices, and read the customer reviews and ratings carefully. You should also check the seller’s return policy and warranty, as well as their reputation in the market.

What happens after screen replacement?

After a screen replacement, the device should function normally. However, it’s recommended to check for any possible issues such as touch responsiveness and display abnormalities. It’s also important to ensure that the replacement screen is compatible with the device model and that the replacement was done by a professional or authorized technician. Some websites, such as iFixit, offer DIY screen replacement kits and step-by-step guides. If you encounter any problems after a screen replacement, it’s best to contact the technician or retailer for assistance.


Replacing a broken or damaged ZTE Blade 11 Prime display may seem like a daunting task, especially if you’ve never done it before. However, with the right tools, instructions, and patience, you can easily restore your phone’s functionality and save money in the process. By following the steps and tips outlined in this article, you should be able to replace your screen with ease and confidence.

Remember that DIY phone repairs are becoming increasingly popular and accessible nowadays, thanks to online tutorials, forums, and stores. However, they also come with risks and limitations, such as warranty voidance and irreparable damage. Therefore, it’s essential to weigh your options, assess your skills, and seek professional help if needed.

If you found this article helpful, please share it with your friends or leave a comment below. Your feedback and suggestions are always welcome and appreciated. Thank you for reading!