The Asus ROG Phone 7 is a high-end Android smartphone designed for gamers. It packs a powerful processor, a high-resolution display, and a long-lasting battery that is perfect for gaming on the go. However, accidents may happen, and the phone’s display may get damaged. Instead of buying a new phone, which can be costly, you can replace the display screen yourself. In this article, we will guide you through the simple and easy steps on how to replace the Asus ROG Phone 7 display screen. We will list all the tools you will need, guide you in disassembling the phone, and show you how to install the new screen. With some patience and guidance, you will regain the crystal clear display that the Asus ROG Phone 7 is known for. So, let’s get started and replace that damaged screen.
Gather the tools and required materials:
Before you start replacing the Asus ROG Phone 7 display, gather all the necessary tools and materials. Here are the things you need:
- Screwdrivers: Philips screwdriver, Torx screwdriver, Pentalobe screwdriver.
- Plastic opening tool.
- Heat gun or hairdryer.
- New Asus ROG Phone 7 display screen.
- Scotch tape.
- Tweezers.
It is essential to have all these tools to ensure the replacement process is completed correctly. You can purchase a brand new Asus ROG Phone 7 screen replacement from any reputed mobile phone parts dealer. Make sure to buy high-quality parts to ensure the display looks and functions well.
Keywords: Screws, screwdrivers, replacement parts, heat gun, hairdryer, mobile phone parts dealer, mobile parts, display screen.
How long does the Asus ROG phone last?
The Asus ROG Phone 7 gaming phone lasted for 18 hours and 32 minutes, which is significantly longer than the average smartphone’s battery life of around 10 hours. This information was reported on April 13, 2023.
To replace the display screen on your Asus ROG Phone 7, you need to remove the battery and back cover first. Here are the steps that you should follow:
Switch off your phone and remove the SIM card tray.
Use the Philips screwdriver to remove the six screws on the bottom of the phone.
Use the Pentalobe screwdriver to remove the two screws on each side of the phone.
Use the plastic opening tool to remove the back cover of the phone by separating the clips that hold it in place.
Using the Torx screwdriver, unscrew the battery connector shield and remove it from the phone.
Disconnect the battery connector from the motherboard using tweezers.
Make sure to keep all the screws in a safe place as they are tiny and easy to lose. Once you have removed the battery and back cover, you can move ahead with replacing your Asus ROG Phone 7 display screen.
For the replacement process, you need a new Asus ROG Phone 7 display screen, which you can purchase online from Amazon or eBay. Make sure to buy a genuine product from a trusted seller to avoid any issues with compatibility or quality.
Before installing the new display screen, make sure to test it to ensure that it works properly. To do this, connect the display screen to the motherboard using the connector, and power on your phone. If the screen works correctly, proceed with the installation process.
To install the new display screen, follow these steps:
Attach the new display screen to the phone using the connector.
Place the battery connector shield back on and screw it in using the Torx screwdriver.
Connect the battery connector to the motherboard using tweezers.
Attach the back cover by aligning it with the phone and pressing down gently until it snaps into place.
Use the Philips and Pentalobe screwdrivers to reattach the screws to the bottom and sides of the phone.
Reinsert the SIM card tray and power on your phone.
With these steps, you should be able to replace the display screen on your Asus ROG Phone 7 with ease. Remember to proceed with caution and take your time during the replacement process to avoid damaging your phone.
What is the price of Asus ROG Phone 2 full kit?
The price of the Asus ROG Phone 2 full kit varies depending on the region and retailer. It is recommended to check the official Asus website or popular e-commerce websites such as Amazon and Best Buy for updated pricing information.
How To Replace Asus ROG Phone 7 Display:
Removing the old display screen:
Once you have removed the battery and back cover, it’s time to remove the old display screen. Here are the steps you should follow:
| Steps | Tools |
|---|---|
| Use the heat gun to warm up the adhesive that binds the screen to the phone. | Heat gun |
| Use the plastic opening tool to lift the display assembly gently. | Plastic opening tool |
| Use the Philip screwdriver to unscrew the two screws holding the metal plate with the connectors in place. | Philips screwdriver |
| Use the plastic opening tool to disconnect the flex ribbon that powers the display assembly. | Plastic opening tool |
| Remove the old display screen from the phone. | None |
While removing the old display screen, be extra careful not to damage any of the small components inside the phone like the flex ribbon or connectors, as this may affect the performance of your phone. Make sure that your work area is clean and free of any dust or debris that may get inside your phone.
Keywords: Replacing Asus ROG Phone 7 Display, old display screen, adhesive, heat gun, Philip screwdriver, metal plate, flex ribbon, performance, work area, dust, debris.
How do you remove a screen display?
To remove a screen display, go to Settings and click on Display. Look for the “Select and rearrange displays” section, choose the monitor you want to disconnect. Then go to “Multiple displays” and select “Disconnect this display” from the drop-down menu. This will remove the screen display.
If you need to replace the display of your Asus ROG Phone 7, don’t worry. It’s easier than you might think! Before you start, make sure you have the right tools for the job. You’ll need a plastic opening tool, a Philips screwdriver, and some screwdrivers to remove the back cover of the phone.
Here are the steps to follow:
– First, remove the back cover of the phone and disconnect the battery to avoid any electrical issues.
– Use the plastic opening tool to gently detach the old screen from the phone. Be careful not to apply too much force as it may damage the phone’s components.
– Once the old screen is detached, set it aside.
Installing the new display screen:
After removing the old screen, it’s time to install the new one. Follow the steps below carefully:
| Steps | Tools |
|---|---|
| Place the new display screen in position. | None |
| Connect the flex ribbon that powers the display assembly. | Plastic opening tool |
| Use the Philip screwdriver to put the metal plate with connectors back in place and fasten the two screws. | Philips screwdriver |
| Press the new display screen onto the phone, making sure it is tightly secured in place. | None |
| Put the phone’s back cover back in place and screw it back in. | Screwdrivers |
While installing the new display screen, keep in mind:
– The new screen should be aligned properly with the phone.
– Make sure all the inside components are in place and tightly secured.
– When fastening the screws, make sure they are not overtightened as this may cause damage to the phone.
You can purchase a brand new Asus ROG Phone 7 screen replacement from any reputable mobile phone part dealer, or websites such as Amazon or eBay.
Keywords: How To Replace Asus ROG Phone 7 Display, tools, plastic opening tool, Philips screwdriver, screwdrivers, components, aligned, inside components, overtightened, mobile phone part dealer, Amazon, eBay.
How do I install a new screen on my laptop?
Replacing a laptop screen can seem intimidating at first, but the process can be fairly simple with the right tools and guidance. One helpful resource is this YouTube video tutorial by Screen Surgeons (https://www.youtube.com/watch?v=uMNIHeP3vu4), which provides step-by-step instructions for replacing a laptop screen. In addition to the video, it’s important to have a replacement screen that matches the make and model of your laptop, as well as a set of tools that are specific to screen replacement (such as a screwdriver set and pry tools). By following the video tutorial and having the necessary tools and replacement screen, you should be able to successfully install a new screen on your laptop.
Are you wondering how to replace Asus ROG Phone 7 display? If your phone has a broken or damaged screen, it can be frustrating to use it. However, with a little know-how, you can replace the display screen on your own. Here is a step-by-step guide for the process:
Step 1: Purchase a replacement screen from a reliable mobile parts supplier or brand such as Asus ROG Phone screen replacements.
Step 2: Assemble the necessary tools for the repair. You’ll need precision screwdrivers, a suction cup, and a flat pry tool to remove the back cover and unscrew several components.
Step 3: Turn off your phone. Use the suction cup to lift the back cover slightly. Insert the pry tool carefully between the screen and the frame. Move the tool around the edge to loosen the adhesive.
Step 4: After separating the back cover, remove all the screws using a precision screwdriver. Keep the screws organized in a magnetic mat or a similar tool to avoid confusion later on.
Step 5: Now, use the pry tool to lift the battery from the motherboard. Next, disconnect all the cables and ribbons that are connecting the display to the motherboard.
Step 6: Use the pry tool and gently separate the display from the frame. Make sure not to damage the components.
Step 7: Take the replacement screen and connect it to the motherboard by reconnecting all the cables and ribbons.
Step 8: Attach the new screen to the frame with adhesive. Finally, insert the screws back in the position where they were originally installed.
Step 9: Power on the phone and test the display to see if the replacement is successful. If everything works fine, then reattach the back cover and you are good to go.
By following these simple steps, you can easily replace a broken display screen on your Asus ROG Phone 7. However, if you face any difficulty in the process, it is recommended to get help from a professional mobile repair service or an Asus service center.
How do I test my monitor screen?
To test your monitor screen, there are a few things you can do. Firstly, check the power and cable connections to ensure they are properly connected. Then, turn the monitor’s brightness and contrast settings all the way up. If that doesn’t work, try connecting a different working monitor. If the different monitor works, check for issues like a disconnected or faulty video card. Lastly, try testing the original monitor with a data cable known to work. If none of these steps work, the last resort would be to replace the monitor.
Conclusion
Replacing the Asus ROG Phone 7 display screen is a task that can be accomplished with basic tools and a bit of patience. This guide will help you to replace your phone’s screen step by step and test the new screen. However, it’s crucial to keep in mind that attempting to replace the screen on your own may void the warranty. If you are not comfortable with the process or if your phone is still under warranty, seek professional assistance. But, if your phone is out of the warranty period, and you want to save money by doing the replacement yourself, make sure to follow the above guidelines carefully to avoid any damage to the phone’s components.
In conclusion, replacing the Asus ROG Phone 7 display screen is a cost-saving and worthwhile process to undertake if your phone’s screen is damaged. Though not a difficult task, it requires careful handling and attention to detail. By following the steps outlined in this guide, you can replace your phone’s screen and get your phone looking and working like new again.
