The Samsung Galaxy Watch 5 Pro is a sleek and functional smartwatch that has captured the hearts of many tech enthusiasts. However, accidents happen, and your watch’s display may crack or break, leaving you with a non-functional device. Instead of shelling out hundreds of dollars to purchase a new smartwatch or relying on a non-functioning device, you can replace the Samsung Galaxy Watch 5 Pro’s display with a little know-how and some DIY skills. In this article, we’ll explain step-by-step how to replace the damaged display and breathe new life into your Samsung Galaxy Watch 5 Pro. Whether you’re a tech whiz or a novice, follow these instructions, and your smartwatch will look as good as new in no time. So, let’s get started!
Preparation
Before you begin replacing your Samsung Galaxy Watch 5 Pro’s display, there are a few things you need to prepare. Here’s what you’ll need:
- A replacement screen
- A screwdriver set
- Adhesive (such as double-sided tape)
- A clean, flat workspace with proper lighting
- A pair of tweezers
It’s also essential to have enough time and patience for the task since it could take an hour or more. Here are some additional tips to help you prepare for replacing your watch’s screen:
- Make sure you have clean hands and do not have any oils or lotion on them.
- Remove the watch strap before beginning to repair your device.
- Turn off your Samsung Galaxy Watch 5 Pro before starting the repair process.
- Watch tutorials or videos about how to replace a smartwatch screen to familiarize yourself with the process.
These preparations will help to ensure that replacing your Samsung Galaxy Watch 5 Pro’s display goes smoothly and without any complications. Before proceeding to the next step, make sure that you have all the necessary tools and materials and a clean and level workspace.
How to replace Galaxy Watch screen?
To replace the Galaxy Watch screen, you can follow a tutorial video on the official Samsung YouTube channel. The video provides step-by-step instructions to safely remove the old screen and install a new one. You can find the video at https://www.youtube.com/watch?v=SLM80ZvnhUs. Make sure to have the proper tools and take your time to avoid damaging your device.
You are a professional writer that writes engaging, factual and helpful content in English language.
Removing the old display
Now that you’ve prepared all the necessary tools and materials, it’s time to start removing your Samsung Galaxy Watch 5 Pro’s old display. Here are the steps to take:
- Place your watch on a clean workspace with proper lighting, and use a screwdriver to remove the backplate.
- Gently loosen the screws located on each corner of the old display using a screwdriver.
- Use a plastic tool or a pair of tweezers to remove the old display gently.
- Disconnect the cable connecting the old screen to the watch’s internal components by gently lifting the connector with your fingers or tweezers.
It’s essential to be careful and gentle when removing the old display to avoid damaging any of the internal components of your smartwatch. Remember that your watch is a delicate electronic device with several sensitive parts. If you’re feeling hesitant about removing the old display, you can check for online tutorials or videos demonstrating how to do it.
Here are some additional tips to help you remove your old screen:
- Use a screwdriver skillfully to avoid causing damage to internal components.
- Be gentle when handling the old screen, as it may still be valuable for resale or reuse.
After carefully removing the old screen, you can move on to the next step: installing the new display.
Links:
- For high-quality Samsung Galaxy Watch 5 Pro’s, visit Samsung’s website.
Note: It is important to confirm the compatibility of replacement screens with your Samsung Galaxy Watch 5 Pro model before buying.
How do I remove my old Galaxy watch from my phone?
To remove your old Galaxy watch from your phone, start by going to the Home screen, then scroll to the right and down. From there, choose Bluetooth, followed by the Settings symbol and then select Unpair. Once you have completed these steps, your Samsung Galaxy Watch4 will be successfully unpaired from your phone.
Installing the new display
After removing the old display, the next step is to install the new display. This step requires a bit of care and precision, so take your time and follow these steps:
- Use adhesive to attach the new screen to your watch’s face, ensuring that it’s straight and correctly aligned.
- Use a screwdriver to carefully attach the new display to the watch components with screws.
- Reconnect the cable to the new screen carefully.
- When you’ve successfully installed the new display, turn on your watch to test the screen’s functionality.
Here are some tips to keep in mind when replacing your Samsung Galaxy Watch 5 Pro display:
- Be sure to use a suitable adhesive to attach the new display to the watch face.
- Use the correct screws and a screwdriver to avoid damaging the device.
- Double-check that the screen is properly aligned before attaching it to the watch.
It’s crucial to take care when installing the new display to avoid making any mistakes that could render the watch unusable. If you’re not confident in your ability to complete this step, consider seeking professional help.
Here is a table summarizing the steps needed to install the new display:
| Step | Description |
|---|---|
| 1 | Attach the new screen using adhesive. |
| 2 | Secure the new display to the components with screws. |
| 3 | Reconnect the cable to the new screen carefully. |
| 4 | Turn on your watch to test the functionality of the new display. |
How do I replace the screen on my smart watch?
Replacing the screen on a smartwatch can vary depending on the make and model. It’s recommended to first consult the manufacturer’s website for instructions and guidance on how to properly replace the screen. Additionally, there may be instructional videos or forums available on third-party websites for specific models of smartwatches. If the smartwatch is still under warranty, it may be best to contact the manufacturer directly for repair options.
Reassembly and testing
The next step after installing the new display is reassembling the device and testing its functionality. Follow these steps to complete the process:
- Reattach the back panel and secure it with screws.
- Reattach the strap, ensuring that it’s properly aligned with the device’s lugs.
- Power on the watch to test that the new display is correctly installed and functioning correctly.
Here are some tips to keep in mind when reassembling and testing your Samsung Galaxy Watch 5 Pro:
- Make sure that the backplate is securely attached to the device to avoid the ingress of water and other debris.
- Take care when reattaching the strap to the device to avoid damaging the lugs.
- Test the device thoroughly to make sure that the new display is functioning correctly and the device is fully operational.
If you run into problems or are unsure about any part of the process, consider visiting a professional watch repair service for assistance.
Here is a table summarizing the steps needed to reassemble and test the device:
| Step | Description |
|---|---|
| 1 | Reattach the back panel and secure it with screws. |
| 2 | Reattach the strap, ensuring that it’s properly aligned with the device’s lugs. |
| 3 | Power on the watch to test that the new display is correctly installed and functioning correctly. |
How do I know if my Samsung watch is genuine?
To check if your Samsung watch is genuine, you can verify its authenticity by checking its packaging, serial number, and physical appearance. Samsung’s official website also has a website where you can check the validity of your device’s IMEI or serial number to ensure it is not a counterfeit product.
If you need to replace the screen on your Samsung Galaxy Watch 5 Pro, it can be a challenging task. However, with proper preparation and careful execution, you can do it. Here’s a step-by-step guide on how to replace the display on your Samsung Galaxy Watch 5 Pro:
- Gather the necessary tools and components. You’ll need a watch repair kit that includes a small Phillips screwdriver, tweezers, a prying tool, a replacement screen, an adhesive strip, and a plastic opening tool. You can buy these items online or at an authorized Samsung service center.
- Power down your watch and remove the band. Use the plastic opening tool to pry off the backplate. Then, remove the battery by prying it up with the tool, taking care not to damage any of the other components.
- Remove the screws holding the motherboard in place. Once the screws are removed, lift up the motherboard from the display and gently unplug the cables connecting them.
- Remove the damaged screen. Gently pry it up with the prying tool and disconnect it from the motherboard, taking care not to damage any of the other components.
- Attach the adhesive strip to the new screen. Align the new display with the bottom of the bezel and press it down firmly.
- Re-attach the motherboard and connect the cables.Carefully place the motherboard back into the watch and screw it in place. Finally, reconnect the cables and put the battery back into its slot.
- Replace the backplate and band. Carefully align the backplate and press it down until it snaps into place. Finally, re-attach the band to the watch.
- Power on your Galaxy Watch 5 Pro. If everything is working correctly, the screen should display as normal.
Additional tips and suggestions:
- Take your time to avoid making any mistakes. Rushing through the process could result in permanent damage to your device.
- Watch video tutorials or read online guides before starting the process to get a better understanding of what’s involved.
- Consider buying a watch repair kit that includes all the necessary tools and components.
- Seek professional help if you’re not comfortable performing the repair yourself or have concerns about your warranty. Consider using websites such as uBreakiFix or Authorized Samsung Service Centers, which offer certified technicians and often provide a warranty on their work.
- Maintain and care for the device regularly to prevent damage to the screen and extend its lifespan.
- Consider investing in a screen protector to prevent future damage to the screen and reduce the likelihood of needing to replace it again.
By following these guidelines, you can replace the screen on your Samsung Galaxy Watch 5 Pro with confidence and extend the lifespan of your device.
Can you replace the screen of Samsung Galaxy Watch 4?
Unfortunately, there is no replacement for the LCD or touch screen of Samsung Galaxy Watch 4. However, if the outer glass of your watch is damaged, you can still purchase a replacement and it will fix the display issues. Some online retailers, such as Amazon and eBay, offer replacement parts for Samsung Galaxy Watch 4.
Conclusion
Replacing the screen on your Samsung Galaxy Watch 5 Pro may seem like a daunting task, but with the right tools and preparation, it’s a doable process. By following the steps outlined in this guide, you can replace your damaged or cracked screen and get your device back up and running smoothly.
Remember that patience is key when performing any type of repair, and taking your time to do it right the first time can save you a lot of headaches down the road. Additionally, seeking professional help or consulting online resources can help you perform the repair more confidently and effectively.
By extending the lifespan of your Samsung Galaxy Watch 5 Pro through maintenance and care, you can make the most out of your device and save money in the long run. Whether you’re replacing the screen or performing other types of repairs, taking care of your smartwatch can help it last for many years to come.
