If you’ve accidentally dropped your Xiaomi Redmi 7 and realized that the display is broken, don’t worry, you’re not alone. It’s a common occurrence for smartphone users to damage their devices at some point, and fortunately, replacing the screen of a Xiaomi Redmi 7 is a relatively simple process. However, it’s essential to proceed with caution and have the appropriate tools before beginning the repair process. In this article, we will provide you with a step-by-step guide on how to replace the Xiaomi Redmi 7 display. We’ll explain what things you need to consider before starting the procedure and equip you with knowledge of the essential tools required to make the repair process easier. It’s crucial to follow every step carefully and make sure your phone is protected from further damage. By the end of this article, you should be confident enough to replace your Xiaomi Redmi 7 display without any assistance.
Getting Started: Safety Precautions and Tools Required
Before you proceed with the Xiaomi Redmi 7 display replacement process, there are some essential safety precautions that you need to observe:
- Turn off the phone before you start the replacement process.
- Place the phone on a flat and stable surface and remove any accessories attached to it.
- Wear safety glasses and gloves to avoid injury due to sharp glass shards.
- Disconnect the battery before beginning the repair process.
Once you’ve observed the safety precautions, it’s time to gather the necessary tools for the Xiaomi Redmi 7 screen replacement process. Some of the essential tools that you will require include:
- Screwdriver set
- Plastic spudgers
- Opening picks
- Pry tools
- Hairdryer or heat gun
- Adhesive tape
You can buy the necessary tools from various online platforms such as Amazon, eBay, or AliExpress, or you can visit your local phone repair store. Some replacement Xiaomi Redmi 7 screens come with the required tools, so it’s crucial to check before purchasing. Additional keywords relevant to this paragraph include screen replacement tools, phone repair tools, Xiaomi Redmi 7 replacement screen, and online shopping.
How to set up Xiaomi Redmi?
To set up Xiaomi Redmi, you need to follow these simple steps:
1. Turn on your phone by pressing and holding the power button.
2. Select your preferred language, region, and time zone.
3. Connect to a Wi-Fi network or mobile data.
4. Log in or create a new Mi account to access various Xiaomi services.
5. Customize your phone settings according to your preferences.
For a more detailed guide, you can watch this informative video on YouTube by searching “How to set up Xiaomi Redmi” or by clicking on this link: https://www.youtube.com/watch?v=Ujulm6SNOnw.
Steps to Replace the Xiaomi Redmi 7 Display
Now that you have gathered the necessary safety precautions and tools, let’s walk through the process of replacing the Xiaomi Redmi 7 display:
- Power off the device and remove the SIM card and SD card trays.
- Next, use a hairdryer or heat gun to warm the edges of the screen to loosen the adhesive.
- Insert a plastic spudger into the gap between the screen and the frame to create enough space to insert the opening pick tool.
- Carefully slide the opening pick tool around the entire screen perimeter, gently prying the display away from the frame.
- Once you’ve successfully removed the screen from the frame, disconnect the display flex cable located at the bottom of the phone by using the pry tool to avoid any damage to the motherboard.
It’s good practice to keep all the screws and components organized during the screen removal process. You can use a magnetic mat or a container with labeled sections to keep everything organized. Here’s a table summarizing the steps to replace the Xiaomi Redmi 7 display:
| Steps | Description |
|---|---|
| Step 1 | Turn off the phone and remove the SIM card and SD card trays. |
| Step 2 | Use a hairdryer or heat gun to warm the edges of the screen to loosen the adhesive. |
| Step 3 | Insert a plastic spudger into the gap between the screen and the frame to create enough space to insert the opening pick tool. |
| Step 4 | Carefully slide the opening pick tool around the entire screen perimeter, gently prying the display away from the frame. |
| Step 5 | Disconnect the display flex cable located at the bottom of the phone by using the pry tool to avoid any damage to the motherboard. |
Additional keywords that are relevant to this paragraph include Redmi 7 screen replacement, Corning Gorilla Glass 5, and pry tool. Interesting facts to note are that Xiaomi Redmi 7 has a 6.26-inch screen with a resolution of 720 x 1520 pixels, and the display is protected by Corning Gorilla Glass 5. You can buy Xiaomi Redmi 7 replacement screens online.
How to remove the redmi lock?
You can remove the Redmi lock screen by following the steps provided in a tutorial video on YouTube. The video link is https://www.youtube.com/watch?v=RxRYvYJdtAA. The instructions in the video demonstrate how to bypass the lock screen without losing data on your Redmi.
How To Replace Xiaomi Redmi 7 Display
After you have successfully removed the old screen, it is time to install the new one and complete the Xiaomi Redmi 7 screen replacement process. Here are the steps that you need to follow:
- Clean the interface of the phone’s motherboard and the touch screen. Ensure that there is no dust or debris before you proceed to attach the new screen.
- Peel off the protective film from the back of the new screen.
- Attach the new screen to the phone with adhesive tape. Make sure to align the screen correctly with the frame and press gently to ensure a tight fit.
- Attach the display flex cable located at the bottom of the phone to ensure proper functioning of the display.
- Fasten the screws on the frame, and put the SIM card and SD card trays back in place.
- Finally, check if the new display is working correctly by turning on the device and testing all the functions of the screen.
Additional keywords that are relevant to this paragraph include Xiaomi Redmi 7 screen replacement guide, motherboard, adhesive tape, and screen alignment. It is important to note that to ensure the quality of the replacement screen, it is highly recommended to purchase original parts from a reliable website or vendor. You can find genuine Xiaomi parts at the official Xiaomi website or on reputable third-party websites.
Can I glue my phone screen back on?
It is not recommended to glue your phone screen back on as it may damage the screen further and render it useless. Applying superglue, which contains cyanoacrylate, may work in stopping a small glass or plastic crack from spreading, but it doesn’t work well with phone screens. It’s best to seek professional help in repairing your phone screen.
How To Replace Xiaomi Redmi 7 Display
If you are looking to replace the display on your Xiaomi Redmi 7, it is important to follow the right steps to ensure that the process is successful. Here are some steps to follow:
- Prepare the right tools and parts. You will need a set of screwdrivers, a suction cup, a plastic card, and a replacement screen compatible with Xiaomi Redmi 7. We recommend MZFIR compatible Xiaomi Redmi 7 screen for easy installation and compatibility.
- Turn off the device and remove the back cover. Start by powering off the Redmi 7 and removing the back cover using the plastic card to avoid damage to the device.
- Detach the battery connector. Locate the battery connector at the bottom of the device, detach it using the plastic card, and set it aside.
- Remove the screws and detach the display. Using the screwdrivers, remove the screws that hold the display in place. Then, gently pry the display from the frame using the plastic card and suction cup.
- Attach the new display and reassemble the device. With the old display out, attach the new display by following the steps in reverse. Reattach the display, screw it back in place, and reconnect the battery. Finally, replace the back cover of the device.
It is important to pay attention to details during the replacement process to avoid any damage to the device. We recommend watching video tutorials or seeking professional help if you are new to smartphone repairs. With the right tools and compatible replacement screen, you can easily replace your Xiaomi Redmi 7 display and enjoy a fully functional device.
How can I test my new redmi phone?
There are a few ways to test a new Redmi phone. Firstly, you can check the device’s display, camera, and speaker quality. Secondly, you can perform a few benchmark tests to check the phone’s overall performance. You can also download and test apps and games to see how they run on the device. Additionally, you can check for any software updates for the device. Xiaomi also has a community forum where you can find tips and tricks for your Redmi phone.
Conclusion
In conclusion, replacing the screen of a Xiaomi Redmi 7 smartphone requires a careful approach, attention to detail, and accuracy. The process may seem daunting at first, but with the right tools and guidance, it can be done successfully.
If you are not confident in your abilities to replace the screen, consider taking your device to a professional repair shop or contacting Xiaomi customer support for assistance. It is better to seek professional help rather than causing further damage to your phone.
However, if you do decide to tackle the Redmi 7 screen replacement process yourself, we hope that this article has provided you with valuable information and guidance to help you through the process.
Always remember to take the necessary safety precautions, gather all the essential tools, and follow the step-by-step instructions carefully to avoid damaging your phone. With a little patience and determination, you can have a new screen on your Xiaomi Redmi 7 smartphone in no time.
