A broken or damaged screen can be a frustrating experience for any smartphone user. If you own a Fairphone 4 and your screen is cracked or broken, you may be considering getting it repaired. However, taking your device to a professional repair shop can be expensive, and in some cases, may not be necessary. If you have a little bit of knowledge and proper tools, you can save yourself some time and money by replacing the screen yourself. In this article, we will provide you with step-by-step instructions on how to replace the Fairphone 4 display. By following these simple steps, you can easily replace your phone’s screen without having to pay for expensive repairs. So, be sure to read on if you’re ready to give it a try and restore your phone’s functionality without breaking the bank.
Before you begin replacing the Fairphone 4 display, here are some pre-requisites that you need to accomplish and the tools required to complete the repair:
- Knowledge: You should have some prior knowledge of mobile phone repair or, at the very least, be familiar with the basics of how a smartphone is constructed.
- Replacement Screen Kit: You will need to buy a replacement screen kit that is suitable for the Fairphone 4. Be sure to purchase it from a reputable source.
- Screwdrivers: You’ll need a pentalobe screwdriver for removing the screws from the phone, a Phillips head screwdriver for disconnecting the connectors, and a flathead screwdriver for prying open the back cover.
- Adhesive Tape: You’ll need adhesive tape to stick the new screen to the phone body to prevent it from moving around.
- Spudger: A spudger is a handy tool for prying open the phone’s components without causing any damage.
It’s important to note that having the correct tools is crucial for the success of the repair. Using the wrong tool is likely to cause damage to the phone, so be sure to invest in a good quality kit. Moreover, there are many websites and online tutorials that provide step-by-step guides on how to replace Fairphone 4 display. Some of the popular websites that can help you in this regard include iFixit, the DIY repair site, and YouTube channels such as JerryRigEverything.
What to do before phone screen repair?
Before going for a phone screen repair, there are a few things that you should do. Firstly, it is important to back up your phone to ensure that you don’t lose any important data. For iPhones, you can either choose to back up everything to iCloud or directly to a computer using a USB cable. Secondly, make sure to erase your phone once you have backed up your data. This will protect your data and personal information from being accessed by someone else. Finally, after the screen has been repaired, you can restore your phone using your backup to get your data back.
How To Replace Fairphone 4 Display:
If you have accidentally broken your Fairphone 4 screen, you might think of purchasing a new phone. However, it can be expensive, and replacing the screen is a much more economical option. In this guide, we will show you how to replace your Fairphone 4 display with a new one.
Before we begin, you must gather the necessary tools for the task. You’ll need a pentalobe screwdriver, a spudger or a thin plastic card, a heat gun or a hairdryer, and a new Fairphone 4 screen replacement. You can easily purchase a new screen replacement from a reliable online store such as iFixit.
Now that you have the necessary tools and knowledge, it’s time to dismantle the Fairphone 4 and replace the display. Here are some steps you need to follow:
- Power off the device before starting the repair process.
- Use a pentalobe screwdriver to unscrew the two screws located on the bottom edge of the phone.
- Use a spudger or a thin plastic card to detach the back cover from the phone.
- Locate the battery connector, and unplug it from the motherboard. You can use a plastic spudger to do that.
- Unscrew the two screws located on the display connector, and detach the connector from the motherboard.
- Liberally apply heat to the screen’s edges to loosen the adhesive and use a suction cup or pry-tool to lift the screen assembly away from the phone from one corner.
- You can replace the broken screen with the new one you’ve purchased. Make sure that you remove the adhesive tape on the new screen before placing it on the phone as it will cause a poor fit.
- Finally, reassemble the device in reverse order, screw back the screws and make sure everything works fine before completing the process.
It’s worth noting that Fairphone prides itself on modular design. This makes repairing and replacing parts much easier compared to other smartphones on the market. Approaching the repair of a broken screen like this helps people to save money and reduce electronic waste. Additionally, online shops such as Amazon provide repair kits containing all the necessary components to replace the phone screen, starting from just $30!
In conclusion, replacing a Fairphone 4 display is not that difficult if you have the necessary tools, knowledge, and patience. With some online guides and tutorials, anyone can learn how to replace the screen and be successful. If you feel unsure, it’s better to seek professional help than to cause more damage to your device.
Can I replace the glass screen on my phone?
Yes, it is possible to replace the glass screen on your phone by using a do-it-yourself repair kit, a replacement screen, and an online video. It is important to repair a cracked screen as continued cell phone use with the crack can cause a loss of functionality over time. Some popular websites that sell repair kits and replacement screens include iFixit and Amazon.
Removing and Replacing the Display:
Now that you’ve opened up the phone, it’s time to remove the damaged display and replace it with the new one. Follow these steps:
- Detach the connector that attaches the display with the phone.
- Carefully remove the broken display from the phone.
- Use a clean cloth to remove any dust or debris from the phone’s frame and clean the back of the new display before installing it.
- Peel off the adhesive tape on the new display, and carefully place it in the phone’s frame.
- Reconnect the display connector to the motherboard.
- Screw back the two screws you removed from the display connector and battery connector.
It’s important to note that when replacing the screen, you may need to transfer some of the components such as the earpiece, front camera, or ambient light sensor from the old display to the new one. Make sure to retain the components from the old display in the best possible condition.
Moreover, if you’re finding it hard to understand the process visually or need more guidance, YouTube videos and Fairphone’s official website can come in handy. They offer detailed instructions on how to replace Fairphone 4 display, including suitable tools, techniques, and recommended replacement kits.
Once you’re done with the replacement, test the new screen on the device. Check the touch response, brightness, and visibility. If everything looks fine, you can finish the process by reassembling the phone and screwing up the back cover.
How to replace computer display?
Replacing a computer display can seem daunting, but it’s actually a relatively simple process. To start, make sure you have the correct replacement display for your computer. Then, use a screwdriver to remove the bezel and unscrew the old display. Carefully disconnect any cables connecting the old display to your computer, and then connect the new display in its place. Screw in any screws and reattach the bezel, and you’re all set! For a visual guide, check out this helpful video tutorial: https://www.youtube.com/watch?v=uMNIHeP3vu4.
How To Replace Fairphone 4 Display
Tools Required:
- Screwdriver set: A small Phillips head screwdriver is suitable for Fairphone 4, while a Torx head screwdriver is required for other phone models.
- Suction cup: Used to lift the screen away from the phone body.
- Opening tool: A spudger or other pointed tool to gently pry open the phone casing without damaging it.
- Tweezers: Used to manipulate small parts during the disassembly and assembly process.
Step-by-Step Guide to Replace Fairphone 4 Display:
- Back up your phone: It’s essential to backup all important data because the phone will be entirely taken apart during the screen replacement process.
- Remove the back cover: Use your opening tool to pry open the back cover gently. It should loosen up without using much force.
- Remove the battery: The battery in the Fairphone 4 is removable, use your opening tool to lift it out.
- Remove the screws: Remove all the screws that secure the inner frame of the phone.
- Lift the inner frame: Use an opening tool to lift and remove the inner frame of the phone carefully.
- Detach cables: Gently remove all the cables that connect to the motherboard, including the display cable.
- Remove the broken display: Use a suction cup to lift the broken display gently. Once the display is free, use your tweezers to remove any screws that might still be holding it in place.
- Attach new display: Use your tweezers to attach the new display in place, securing it with screws.
- Reconnect the cables: Make sure all the cables are carefully reconnected, including the display cable.
- Attach the inner frame: Gently place the inner frame back in place, securing it with screws.
- Put back the battery: Reinstall the battery in its correct position.
- Close the back cover: Use the opening tool to snap the back cover back to its position.
Testing and Finishing Up:
After replacing the display, it’s a good practice to test the new screen to avoid any issues later on. Here’s what you need to do:
- Turn on the device: Check if the screen is displaying correctly.
- Verify touch screen and buttons: Verify if the touch screen is responding accurately, and all the buttons are working correctly.
- Check brightness level: Check the brightness level and make sure the automatic brightness adjustment is working fine.
- Inspect screen visibility: Inspect the screen’s visibility from different angles and ensure that the new display adhesive is strong enough to hold the screen firmly in place.
If the screen is performing up to expectations, you can now finish up the process by screwing back the back panel following the reverse order of the disassembly process. Remember to use the spudger or opening tool instead of hands to press and snap the cover back in place.
In conclusion, the process of replacing a Fairphone 4 display may seem intimidating at first, but it’s doable with the right tools and knowledge. The internet is full of resources that can come in handy when trying to replace a broken screen. You can also consider purchasing a screen replacement kit or consulting with a professional if you’re unsure about the process.
What are some of the testing best practices?
Some of the testing best practices are to define the objectives of the testing process, ensure that the tests cover the right areas, create a test plan with measurable objectives, establish test conditions and procedures, invest in a secure testing environment, and shift-left continuous testing. These practices can be applied to website or product testing to ensure that they meet the necessary requirements and are of high quality.
Conclusion:
Replacing the screen of your Fairphone 4 may seem like a daunting task, but it is possible with the right tools and knowledge. Follow this step-by-step guide carefully, and you should be able to replace your phone’s screen with ease.
However, if you’re not confident about performing this repair, it’s best to consult a professional or a certified service center. They have the right tools and expertise to perform the repairs correctly without causing any damage to your device.
In conclusion, a damaged screen can severely impact your phone’s performance and usability. If you have a Fairphone 4 with a broken screen, take the necessary steps to replace it as soon as possible. With the right tools, knowledge, and patience, you can repair your device and save on costly repairs or replacements.
